Interphase Tech iSPAN 5535 PRI Manual de usuario Pagina 114

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 113
Understanding LoopTest Messages
94 Interphase Corporation
Understanding LoopTest Messages
The Diagnostic field in the main LoopTest dialog displays
LoopTest test results:
Figure C-4. LoopTest Main Dialog
The following table describes diagnostic messages:
Message Cause
Test passed LoopTest detected no errors during testing.
Card missing or
non-ISDN
An error occurred before accessing the network.
Possible causes are:
The adapter is not installed.
The drivers are not properly installed.
LoopTest could not find an ISDN port on the
adapter. To check for ISDN ports:
a. From the Start menu, select Programs, then
INTERPHASE WAN Adapters, and then WAN
Setup.
b. Make sure the firmware contains the ISDN layer.
Vista de pagina 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 167 168

Comentarios a estos manuales

Sin comentarios